A solar fence light installation on your vehicle may seem like a simple thing, but if you don’t know how to install it, it could save you time and money.
This article will walk you through the process of installing a solar fence in your car.1.
Find out what kind of lights you need and what type of lights will work for you2.
Select the right type of light, what type and size of light you want3.
Select your light gg for the vehicle, if you want to install a “light”, and make sure you’re installing correctly4.
Get a gauge or scale5.
Connect the gauge or meter to your solar fence, and measure the output6.
Check the meter and gauge to make sure it’s working and it’s not causing any damage to the gg or meter7.
Plug the meter into the meter, and set the output to your desired wattage (usually between 50 and 100W).8.
Check that the meter is still showing the desired output.
If it is, you’ve installed a solar light.9.
Install the light on the solar fence using a wire from the meter to the sensor.10.
If you have a light that is connected to a meter, wait for the meter output to drop before you can continue.11.
If the meter isn’t showing a new output after two hours, and you haven’t connected the meter wire to the light before, disconnect the meter from the gb and wait for it to drop.12.
Check your meter to make certain it’s still showing a output, and disconnect it from the solar light if it’s showing a “green light”.
If you’re unsure how to wire your light to the solar system, check out this article.13.
Plug your meter into a new meter.14.
Check to make your gauge go from zero to 60W.
If your gauge is still “green” when it goes from zero, your meter has not connected properly to the system.15.
Check and re-check your meter.
If a green light is still on, the system has not been correctly wired.16.
If that doesn’t fix it, connect the meter wires back to the gauge and disconnect them from the new meter wire.17.
If there are no new output lines connecting to your new meter, connect your meter wires to the new gauge wire, and reconnect them to the old meter wire when the meter goes back to zero.18.
Wait a few hours and plug the meter back in.19.
Check if the meter still shows a “Green light”.
If not, you have installed a light.20.
Plug in your new light.21.
Plug it in and see how it looks on your solar system.